Xynpol AO557L
Xynpol AO557L is waterborne self-cross- linking acrylate dispersion with solid content of 47-49%. Some of the features of Xynpol AO557L are mentioned below:
- Modified with VeoVa
- Having coreshell technology
- Fine particle size
- low-medium viscosity
- Make highly durable wood coatings
- Good breathability
- Low water sensitivity.
- Hydrophobic in nature
- Tend not to soak into wood fibers
- Very low end-grain raising
- Very good corrosion resistance when applied to metal
Main applications of Xynpol AO557L are as following:
- High performance wood coatings
- Anti-corrosive primers
- DTM
- High gloss topcoats
- Multi surface coatings for wood, metal and plastic
xynpol AO551 L:
Xynpol AO551L is waterborne self-cross- linking acrylate dispersion with solid content of 49-51%. Structure of this resin is very similar to xynpol AO557 L. Only differences are related to higher solid content and higher viscosity than Xynpol AO551L. Some of the features of Xynpol AO5571 are mentioned below:
- Modified with VeoVa
- Having coreshell technology
- Fine particle size
- low-medium viscosity
- Make highly durable wood coatings
- Good breathability
- Low water sensitivity.
- Very good corrosion resistance when applied to metal
- Excellent photochemical stability
- High shear stability,
- excellent under film corrosion protection
- excellent water resistance,
- excellent UV stability
- non-yellowing
- good inhibitive pigment stability and outstanding salt fog performance
- film formation in low temperature with small amount of coalescing agent
Main applications of Xynpol AO557L are as following:
- Anti-corrosive primers
- DTM
- High gloss topcoats
xynpol PA 533 L:
xynpol PA 533 L is a water based pure acrylic dispersion with solid content 44-46%. This material has viscosity between 100-500. The features added by xynpol PA 533 L to formulation is mentioned below:
- High gloss
- Block resistance
- Scratch resistance
- Wet adhesion
- Alkali and water resistance
- Have corshell technology
- Compatible with a wide range of thickeners, filler and defoamers to adjust viscosity
- Good resistance to UV and ageing
Xynpol PA 533 L resin can be used in formulations of wood coatings, high gloss, semi-gloss paints and wood stains.
xynpol SA 513 L:
xynpol SA 513 L is a water based flexible styrene/ acrylic ester dispersion with solid content of 49-51% and viscosity of 4000-9000. The features of xynpol SA 513 L are mentioned below:
- Fine particle size
- High degree of water resistance and flexibility for elastomeric wall coatings and roofing compounds
- Good wet adhesion to masonry substrates
- Low minimum film forming temperature (film integration can be aided by addition of coalescing solvent)
- Compatibility with a wide range of thickeners to adjust the desired viscosity and improve process ability
Xynpol SA513L is particularly recommended for the manufacture of flexible exterior coatings. Note that, Masonry substrates should be well-prepared before application of the finished paint. Friable surfaces can be treated with Xynpol PA300H.
Xynpol PA 300 H:
xynpol PA 300 H is water based pure acrylic dispersion with solid content of 29-31%. This acrylic resin has ultra-fine particle size, high water resistance and high flexibility. The product is diluted 1:1 with water in order to achieve the correct viscosity, substrate wetting and penetration properties. It is also necessary to add a suitable in-can biocide. Also, it must be noted that xynpol PA 300 H does not need any wetting or coalescing agent.
Main applications of xynpol PA 300 H are as following:
- Penetrating primer for use on porous and friable substrates
- Exterior construction applications
- Interior sealing of plasters prior to painting
- As part of a high performance exterior coating system for use in crack bridging, certified anticarbonation coatings and acrylic roofing compounds
- Priming masonry and plaster substrates in interior applications, where it reduces suction, coating and colour variability, particularly when coalescent free paints are over-coated
- Priming of plasterboard
xynpol SA 510 L:
xynpol SA 510 L is a kind of water based styrene/ acrylic ester dispersion with solid content of 49-51%. This material has viscosity in range 6000 to 12000. This resin is used in production of interior high PVC paints and exterior coatings. Paint films based containing Xynpol SA510L has excellent scrub performance and durability. Xynpol SA510L also exhibits high gloss levels in semi-gloss paints. The dispersion is therefore an excellent choice for a multipurpose binder for decorative coatings for interior and exterior application. In case of addition small amount of coalescing agent, the minimum film forming temperature will be reduced.
xynpol PA 313 H:
xynpol PA 313 H is a water based pure acrylic dispersion with solid content of 39-41%. Xynpol PA313H can be used as a binder for plasters and textured masonry coatings. This resin offers great early water resistance in such systems. Xynpol PA313H must be diluted 1:1 with water in order to achieve the correct viscosity, substrate wetting and penetration properties. It is also necessary to add a suitable in-can biocide. Note that the formulation including xynpol PA 313 H does not require the addition of coalescing solvent, nor additional wetting agent.
Two important applications of xynpol PA 300 H are as following:
- Priming masonry and plaster substrates in interior applications, where it reduces suction, coating and color variability
- Manufacturing high gloss shoe and leather care polishes
xynpol PA530 LUV
xynpol PA530 LUV is a water based surfactant stabilized acrylic dispersion with high solid content of 63-65%. Some of the features of xynpol PA530 LUV are mentioned below:
- Excellent exterior durability
- Outstanding dirt pick up resistance
- Good low & high temperature elasticity
- Crack bridging features
- Good breathability by allowing water vapour to permeate out of the substrate.
- Great level of elasticity in manufactured coating
- Good UV resistant in manufactured coating
- Suitable chalk resistance
Main applications of xynpol PA530 LUV are as following:
- manufacturing of durable elastomeric wall coatings
- flexible roof coatings
- excellent base for anticarbonation paints, combining good CO2 barrier properties with satisfactory water vapour permeability
xynpol PA 431 K:
Xynpol PA431K is a high solids dispersion of an acrylic ester copolymer. When it dries, it will produce a pressure sensitive film with aggressive tack. Xynpol PA431K is a suitable base for permanent tape and label applications.
Two important applications of Xynpol PA431K are as following:
- Permanent tapes
- Labels
xynpol PA 432 K:
Xynpol PA431K is a high solids dispersion of an acrylic ester copolymer. When it dries, it will produce a pressure sensitive film with moderate tack, high cohesion and suitable water resistance. This material has solid content of 57-60% and viscosity of 100 to 2000. It has good adhesive properties in contact with plasticized PVC films and surfaces having excellent tolerance to commonly used vinyl plasticizers.
Two important applications of Xynpol PA432K are as following:
- Permanent tapes
- Permanent/repositionable tapes and labels.
xynpol PA 436 K:
Xynpol PA436K is a ready to coat dispersion to produce a pressure sensitive film. This material has good cohesion and tack and low adhesion on most surfaces. When using Xynpol PA436K for labels, it shows limited adhesion over time, so, allowing clean removability on many surfaces. Xynpol PA436K is a ‘coater ready’ adhesive suitable for transfer coating on reverse gravure equipment.
Two important applications of Xynpol PA436K are as following:
- removable paper tapes
- labels
xynburst 9615:
Xynburst 9615 is an organic defoamer based on sustainable raw materials. This material is a blend of synthetic esters and fatty alcohols. Xynburst 9615 is VOC free and does not contain mineral oils, silicones/siloxanes, amines, nitrates or fluorides. Xynburst 9615 is recommended for aqueous polymer dispersions, styrene/acrylic, pure acrylic and vinyl acetate based. Xynburst 9615 is completely dispersible and has typical dosage between 0.1 and 0.5% wt. of total formulation.
xyndisp XX101D:
Xyndisp XX101D is a water-based, solvent free acrylic solution polymer for dispersing (mineral) pigments and fillers. It is also very suitable for the dispersing of colorants and reactive pigments. Xyndisp XX101D is a low molecular weight solution and gives excellent scrub performance in medium to high PVC paints (30% to 80%) and optimal gloss in lower PVC paints. This product has great high compatibility with glycol and it can be formulated over a wide pH range, 4 to 13. It is also recommended to use xyndisp XX101D and Xyndisp 4500AD with each other. The optimum dosage varies according to the formulation but it started from 1.5% based on weight of filler/pigment.
xynwet 4000 BW:
Xynwet 4000BW is a solvent-free biodegradable wetting agent suitable for paints, adhesives, printing inks. This material has following features:
- Wetting of pigment surface
- Wet edge of water based paints
- Gloss improvement of water based lacquers
- Improved pigment grinding efficiency
- Reduction in pigment particle size.
- Improved anti-corrosion properties on ferrous substrates.
- Improved leafing of aluminium pigments
- non-foaming features to reduce amount of required anti foam
- Reduction fish eyes and cratering
The dosage of this material is dependent of each system conditions, but it could start from 1% to 2% on paint weight.
xyntrol DBE-B:
Xyntrol DBE-B is a coalescing agent for waterborne systems and a tail solvent in solvent borne systems. This material could be used as an alternative for texanol, which has modified features mentioned below:
- Reduced Odour
- Improved Wet Scrub Resistance
- Reduced MFFT
- Half dosage level in comparison with texanol